These results are ranked by popularity.
| Error | |
|---|---|
| L4-01 | Description: Main motor lock detection When it is detected for 3 times continuously in the interval of 500ms after ignoring the main motor drive for 600ms. |
| F2-31 | Description: Process control trouble (Photoconductor surface reflection rate abnormality) Before starting process control, the drum surface is read by the image density sensor to make the sensor gain adjustment so that the output is fixed to a certain le |
| EE-EU | Description: Auto developer adjustment trouble (Undertoner error) Described on the toner density control design specifications and the change request. When the average of 10 output values of the toner sensor (sampling data) after completion (3 min) of th |
| F4-38 | Description: 38V voltage trouble 38V voltage falls or rises. When the 38V MON signal is not turned on in 50ms after turning on the INTRP. |
| F1-32 | Description: Finisher-saddle communication trouble Communication error between the finisher and the saddle When the motor rotation speed (linear velocity) at every 200msec falls below the specified level. When moving to the home position, the home positi |
The most common error codes.
| Error | |
|---|---|
| L4-01 | Description: Main motor lock detection When it is detected for 3 times continuously in the interval of 500ms after ignoring the main motor drive for 600ms. |
| F2-31 | Description: Process control trouble (Photoconductor surface reflection rate abnormality) Before starting process control, the drum surface is read by the image density sensor to make the sensor gain adjustment so that the output is fixed to a certain le |
| EE-EU | Description: Auto developer adjustment trouble (Undertoner error) Described on the toner density control design specifications and the change request. When the average of 10 output values of the toner sensor (sampling data) after completion (3 min) of th |
| F4-38 | Description: 38V voltage trouble 38V voltage falls or rises. When the 38V MON signal is not turned on in 50ms after turning on the INTRP. |
| F1-32 | Description: Finisher-saddle communication trouble Communication error between the finisher and the saddle When the motor rotation speed (linear velocity) at every 200msec falls below the specified level. When moving to the home position, the home positi |
| L4-01 | Description: Main motor lock detection When it is detected for 3 times continuously in the interval of 500ms after ignoring the main motor drive for 600ms. |
| F2-31 | Description: Process control trouble (Photoconductor surface reflection rate abnormality) Before starting process control, the drum surface is read by the image density sensor to make the sensor gain adjustment so that the output is fixed to a certain le |
| EE-EU | Description: Auto developer adjustment trouble (Undertoner error) Described on the toner density control design specifications and the change request. When the average of 10 output values of the toner sensor (sampling data) after completion (3 min) of th |
| F4-38 | Description: 38V voltage trouble 38V voltage falls or rises. When the 38V MON signal is not turned on in 50ms after turning on the INTRP. |
| F1-32 | Description: Finisher-saddle communication trouble Communication error between the finisher and the saddle When the motor rotation speed (linear velocity) at every 200msec falls below the specified level. When moving to the home position, the home positi |
